Keyboard Shortcuts and Mouse Reference
Waveform Navigation
| Input |
|
Action |
| Space |
|
Start or stop capture |
| Scroll wheel (up) |
|
Zoom in, centered on mouse position |
| Scroll wheel (down) |
|
Zoom out, centered on mouse position |
| I |
|
Zoom in at current mouse position |
| O |
|
Zoom out at current mouse position |
| M |
|
Toggle Measure Mode (hover measurements) on or off |
| Ctrl + scroll wheel |
|
Zoom vertically on an analog / Value / graph row, anchored at the mouse (add Shift for all such rows) |
| Left-click drag |
|
Pan the waveform left or right (a clearly vertical drag on an analog / Value / graph row pans that row's value axis instead; add Shift for all such rows) |
| Arrow Right |
|
On a focused text/bus/packet row, jump to the next decoded event; on other rows, nudge the waveform right by a small step |
| Arrow Left |
|
On a focused text/bus/packet row, jump to the previous decoded event; on other rows, nudge the waveform left by a small step |
| ZOOM ALL button |
|
Fit entire capture on screen |
| DISPLAY LIVE DATA button |
|
Jump to end of capture and resume auto-scroll |
Command Palette and Command Shortcuts
Most common commands also carry a keyboard shortcut and are listed in the View menu. Press Ctrl+K to open the Command Palette, a search box that fuzzy-matches every menu command, type a few letters and press Enter to run it.
| Shortcut |
|
Action |
| Ctrl+K |
|
Open the Command Palette (fuzzy command search) |
| Ctrl+Home |
|
Zoom All, fit the entire capture on screen |
| Ctrl+Shift+X |
|
Zoom to the range between the X1 and X2 cursors |
| Ctrl+L |
|
Display Live Data, jump to the live edge and resume auto-scroll |
| Ctrl+Left |
|
Jump to the previous recorded trigger |
| Ctrl+Right |
|
Jump to the next recorded trigger |
| Ctrl+T |
|
Center the current trigger in the window |
| Ctrl+Enter |
|
Apply Changes, reprocess the capture with current settings |
| Ctrl+M |
|
Add a marker at the mouse position |
Location-based commands (Add Marker, Place Cursor, Zoom In/Out) act at wherever the mouse was when you invoked them or opened the palette.
Trigger Navigation (Status Bar)
| Button |
|
Action |
| << |
|
Previous trigger if one is on screen; otherwise pan left half-screen. Auto-repeats while held. |
| CENTER TRIGGER |
|
Re-center the most recent trigger horizontally in the window. Disabled when no trigger has fired. |
| >> |
|
Next trigger if one is on screen; otherwise pan right half-screen. Auto-repeats while held. |
| APPLY CHANGES |
|
Reprocess the capture with current Custom Decoders, Packet Presenters, and Trigger Search settings. Enabled only when settings have changed and no live capture is running. |
See Buffer & Triggers for the full trigger reference.
Cursor Placement
| Input |
|
Action |
| Double left-click |
|
Place X1 cursor at that position |
| 1 (while hovering over waveform) |
|
Place X1 cursor at current mouse position |
| Double right-click |
|
Place X2 cursor at that position |
| 2 (while hovering over waveform) |
|
Place X2 cursor at current mouse position |
| Single left-click |
|
Anchor the decoded-data list at the clicked time (pauses live auto-scroll). The Current Cursor keeps following the mouse |
| Right-click drag |
|
Select a time range (places X1 and X2 simultaneously); releases a context menu |
| Escape |
|
Cancel a right-click drag in progress before releasing the mouse |
Range Export (Context Menu after Right-Click Drag)
| Shortcut |
|
Action |
| Ctrl+C |
|
Copy AI Snapshot from the selected range |
| Ctrl+Shift+C |
|
Copy decoded data as CSV from the selected range |
File Operations
No File menu items have keyboard shortcut accelerators. All file operations are invoked through the File menu.
List Tab Navigation
| Key |
|
Action |
| Arrow Up |
|
Scroll List tab up one row |
| Arrow Down |
|
Scroll List tab down one row |
| Page Up |
|
Scroll List tab up one page |
| Page Down |
|
Scroll List tab down one page |
Notes Editor
These shortcuts are active when the text cursor is in the Notes editor (Notes tab).
| Shortcut |
|
Action |
| Ctrl+Z |
|
Undo |
| Ctrl+Y |
|
Redo |
| Ctrl+X |
|
Cut selected text |
| Ctrl+C |
|
Copy selected text |
| Ctrl+V |
|
Paste |
| Ctrl+B |
|
Bold |
| Ctrl+I |
|
Italic |
| Ctrl+U |
|
Underline |
| Ctrl+- |
|
Insert bullet (unordered) list |
| Ctrl+= |
|
Insert ordered (numbered) list |
| Ctrl+, |
|
Decrease indentation |
| Ctrl+. |
|
Increase indentation |
The Notes editor toolbar also has buttons for Remove character formatting and Remove all formatting; neither has a keyboard shortcut.
Mouse Reference Summary
| Mouse Action |
|
Where |
|
Result |
| Scroll wheel |
|
Waveform panel |
|
Zoom in/out centered on mouse |
| Ctrl + scroll wheel |
|
Analog / Value / graph row |
|
Zoom the row's value axis vertically, anchored at the mouse |
| Vertical drag |
|
Analog / Value / graph row |
|
Pan the row's value axis up/down |
| Click ↕ / ⌂ chip (right edge) |
|
Analog / Value / graph row |
|
Fit the row to view (↕) or reset it to the whole-capture scale (⌂) |
| Two-finger scroll (trackpad) |
|
Waveform panel |
|
Zoom in/out |
| Two-finger swipe sideways (trackpad) |
|
Waveform panel |
|
Pan left/right |
| Left-click drag |
|
Waveform panel |
|
Pan left/right |
| Hover (Measure Mode on) |
|
Analog/logic waveform |
|
Show the cycle range bracket; pause to reveal the measurement card |
| Double left-click |
|
Waveform panel |
|
Place X1 cursor |
| Double right-click |
|
Waveform panel |
|
Place X2 cursor |
| Single left-click |
|
Waveform panel |
|
Anchor decoded list at clicked time; pause auto-scroll |
| Right-click drag |
|
Waveform panel |
|
Select time range for export or snapshot |
| Right-click drag |
|
List tab |
|
Select row range for export or snapshot |
| Left-click |
|
Decoded text event in waveform |
|
Scroll List tab to that event |
| Left-click |
|
Row in List tab |
|
Scroll waveform to that timestamp |
| Left-click |
|
Active Debug Port event in waveform |
|
Show source code line in Source Code tab |
| Right-click |
|
Active Debug Port event in waveform |
|
Context menu with Show Source Code option |
| Double-click |
|
Channel name in Name column |
|
Rename channel (press Enter to confirm) |
| Left-click drag |
|
Channel row tab in Name column |
|
Reorder channel position |
| Left-click |
|
Group header row |
|
Collapse or expand the channel group |
Clicks on the trigger status badge pass through to the waveform below. To center the most recent trigger in the view, use the CENTER TRIGGER button in the status bar.
